Dungeon Epoxy Designs, home
(352) 851-8506
Two-car garage with a glossy dark red and black flake epoxy floor, the door open onto a driveway at sunset

Garage floor coating in Brooksville, FL

Flake, metallic, quartz or solid color over a diamond-ground slab. Prices run $4 to $20 a sq ft by system, and a typical job takes 2 to 3 days.Flake, metallic, quartz or solid color over a diamond-ground slab.

  • 5 to 10 year limited warranty
  • A typical job takes 2 to 3 days
  • Flake, metallic, quartz and solid color
  • Owner-run, based in Brooksville
  • Insured
  • Hernando, Pasco, Hillsborough, Pinellas and Polk

Prep first

What the price covers

A garage floor coating is only as good as the concrete under it. So the price starts with slab work. We diamond-grind the floor with a dust extractor running, repair the cracks and tape off the walls and steps. Then the base coat goes down, the flake, and a clear topcoat to finish.

That prep is the part a weekend kit skips. It's also why kit floors peel.

We're based in Brooksville, in Hernando County, and coat garages from Spring Hill to Tampa, across Hernando, Pasco, Hillsborough, Pinellas and Polk. A typical epoxy garage floor takes 2 to 3 days. Yours comes with a 5 to 10-year limited warranty.

Our work

Garages we have finished

Left is the slab we found, right is the floor we left. Drag the line. ClickTap any photo to see it large.

Pasco County garage before the job: bare grey concrete slabThe same Pasco County garage after: dark red and black flake floorBeforeAfter

See every photo in the image gallery

By system

Five floors for a garage

Same prep under every one. What changes is the look and the price per foot.

  • Flake floor texture seen from above

    Flake

    $4 to $12 per sq ft

    Colored chips go into the wet base coat and get sealed under a clear topcoat. You get a speckled floor with a little texture underfoot. The Pasco garage above is flake. Ours comes from the Xtreme Polishing Systems (XPS) In Stock collection, sports-team colors included.

  • Metallic epoxy texture seen from above

    Metallic

    $12 to $20 per sq ft

    Metallic pigment is worked through the epoxy so it swirls like poured stone. No two floors come out the same. It suits a garage that doubles as a showroom.

  • Quartz epoxy texture seen from above

    Quartz

    $12 to $15 per sq ft

    Colored quartz granules are broadcast into the epoxy for a hard, sandy surface. It's common in commercial kitchens. In a garage, it fits a workshop or a floor that's often wet.

  • Solid color epoxy seen from above

    Solid color

    $7 to $10 per sq ft

    One color of epoxy, no chips. A plain, even floor for a workshop or storage garage. Fair warning: it shows dust more than flake does.

  • Polyaspartic flake texture seen from above

    Polyaspartic

    $5.60 to $14.50 per sq ft

    A different coating chemistry from epoxy. Its big plus is color that holds up in strong sun, which matters in a west-facing garage with the door open all afternoon.

Price guide

Epoxy garage floor cost

An epoxy garage floor in Brooksville and across Hernando, Pasco, Hillsborough, Pinellas and Polk runs $4 to $12 per sq ft in flake, $7 to $10 in solid color, $12 to $15 in quartz and $12 to $20 in metallic. Polyaspartic runs $5.60 to $14.50. That covers the diamond grinding, the crack repair and every coat. Where your floor lands in the range depends mostly on the moisture barrier, and in Florida we recommend one on every slab. These are our own numbers. We price every job on its own, so use them as a guide.

Worked example: A 20 x 20 ft two-car garage is 400 sq ft. In flake, that runs about $1,600 to $4,800.

Floor

400 sq ft

About a 20 x 20 ft floor.

About

$1,600 to $4,800

At $4 to $12 per sq ft. We price every job on its own, so use this as a guide.

Roll-on kit over a washed floorOur floor, on a ground slab

Summer heat

Will hot tires lift it?

Park after a drive on a summer afternoon, and hot tires can grab a weak coating and pull it up as they cool. That's hot tire pickup. It mostly hits coatings that sit on top of the concrete, like a roll-on kit over a washed floor.

Our answer is the prep. The slab gets diamond-ground before any epoxy goes on, so the base coat bonds to open concrete. If hot tires are your top worry, ask us about polyaspartic.

Resurfacing

Old slab or old coating

Plenty of garage floors come with history. Oil stains, hairline cracks, a coat of paint, or an old epoxy job that's starting to peel.

The fix comes first. Stains and loose coatings get ground off, cracks get filled, and the new floor goes down on sound concrete.

Got an epoxy floor that's worn but still stuck tight? It may only need a recoat. We'll tell you which one you have when we see it.

Filling a crack in a garage slab beside the water heater before coating, Polk County
Crack repair, Polk County

Step by step

How a garage job runs

  1. You ask

    Answer a few questions in the quote form, or call (352) 851-8506.

  2. We call back

    As soon as we can, to hear about the garage.

  3. We look at the slab

    We come out to see the concrete, then price your floor.

  4. The work

    Grinding and repairs first, then the coats. A typical job takes 2 to 3 days.

  5. Care

    You get care instructions with the floor. Follow them and the warranty holds.

Grinding the slab, Polk County
Call us(352) 851-8506

Backed for 5 to 10 year limited warranty

On the system we agreed to install, depending on maintenance and care. Impact, chemical damage, excessive heat, standing water and slab movement aren't covered.

Read the full warranty terms
  • Covers system failure
  • Covers prep failure
  • Holds when you follow the care instructions

Garage floor questions

Still have a question? Call us at (352) 851-8506.

A 20 x 20 ft two-car garage is 400 sq ft. In flake, that runs about $1,600 to $4,800. We price every job on its own.

We won't put a lifespan on it that we can't back. What we do give you is a 5 to 10-year limited warranty, depending on maintenance and care. Past that, it comes down to how the floor is used and looked after.

There are a few. Your garage is out of use for the 2 to 3 days of the job. Plain epoxy can yellow in strong sun over time, which is one reason people choose polyaspartic. A smooth gloss floor gets slick when it's wet, and flake adds some grip. And a dropped jack stand can chip any coating. Impact isn't covered by the warranty.

Yes, with care. Keep the pressure under 3,000 PSI, use cold water and a wide-angle tip (40 or 45 degrees), and hold the nozzle 12 to 18 inches off the floor. Higher pressure or hot water can strip or damage the coating.

It can. Moisture coming up through a slab is one of the things that pushes coatings off, and Florida concrete sees plenty of it. That's one more reason the prep comes first.

The combinations are endless, and we mix new colors too. See custom epoxy floor colors.

Get a quote

Tell us about your garage

Tell us the size and the floor you like. We call you back as soon as we can.

Step 2 of 5

Your answers so far: Garage

Which floor do you want?

Prices are a guide. We price every job on its own.

Goes straight to us. We never sell your details.

What happens next

  1. You answer five short questions.
  2. We call you back as soon as we can.
  3. We come out to look at the slab and price your floor.
Call (352) 851-8506

Get a quote

Step 1 of 5

What are we coating?