Flake epoxy floors for Florida garages
Colored chips thrown into an epoxy base and sealed under a clear topcoat. The Pasco and Polk County garages in our gallery are both flake.Colored chips thrown into an epoxy base and sealed under a clear topcoat.
- 5 to 10 year limited warranty
- A typical job takes 2 to 3 days
- Flake, metallic, quartz and solid color
- Owner-run, based in Brooksville
- Insured
- Hernando, Pasco, Hillsborough, Pinellas and Polk
What it is
The floor most garages get
A flake epoxy floor is the speckled garage floor you have probably seen at a neighbor's house. Under the speckle is your old slab. We grind it, fill the cracks and roll a base coat over it. The flake goes on by hand while that base is wet, and a clear topcoat seals it in.
It's a floor for a garage that gets used.
A solid color shows every footprint the day after you sweep. Flake hides the dust and the grey haze tires drag in, so the floor looks clean longer than it actually is.
We work out of Brooksville and coat garage floors from Hernando and Pasco down to Hillsborough and Pinellas, and east into Polk.
Our work
Two flake garages we finished
Both are our own jobs, photographed on site. The before and after photos are in the gallery.
Pasco County, late September 2026
Dark red and black flake on what started as a bare grey slab.
Polk County, June 2026
Blue-grey flake. The crew ground the slab with a dust extractor, repaired the cracks, put down the base coat and broadcast the flake.
The speckle
Why the speckle works
Flake is thin vinyl chips in a mix of colors. Thrown into wet epoxy, they land at random and overlap, so you never see one flat color for more than an inch. That randomness is the whole trick. A scuff sits on a busy pattern instead of a blank one, and your eye skips right over it.
The chips also leave a little texture under the topcoat. You feel it more than you see it.
Price guide
What a flake floor costs
Flake runs $4 to $12 per square foot. Where your floor lands in the range depends mostly on the moisture barrier, and in Florida we recommend one on every slab. Two garages the same size can hide very different slabs. That's why we price every job on its own.
Worked example: A 20 x 20 ft two-car garage (400 sq ft) in flake runs about $1,600 to $4,800.
About a 20 x 20 ft floor.
About
$1,600 to $4,800
At $4 to $12 per sq ft. We price every job on its own, so use this as a guide.
Chip blends
Pick a chip blend
Our flake comes from Xtreme Polishing Systems (XPS), out of their In Stock flake collection. That's a long list of blends before we mix anything ourselves.
We also point people to the XPS sports-team garage floor colors, if you want your team on the floor.
We create new colors too. There are endless different color combinations. If the blend in your head isn't on the chart, describe it when you ask for a quote.
Floor visualizer
See the colors on a floor first
Tap a blend and watch the floor change. Then open the visualizer and try it on a photo of your own garage.
Open the visualizer
Flake blend · Dark red and black
Step by step
How a flake floor goes down
A typical job takes 2 to 3 days. The color shows up near the end.
Grind
A diamond grinder opens up the top of the slab so the epoxy has something to bite. A dust extractor runs with it.
Repair
Cracks get filled before any coating goes down. A crack you coat over comes back through.
Mask
Walls and steps get taped off.
Base coat
This is the layer that holds the flake.
Flake
Flake is thrown by hand into the wet base.
Topcoat
A clear topcoat locks the chips in and gives the floor its shine.
2 to 3 days
Backed for 5 to 10 year limited warranty
Depending on maintenance and care. Misuse, impact, chemical damage and standing water aren't covered.
Read the full warranty terms- Covers system failure
- Covers prep failure
- Holds when you follow the care instructions
Flake floor questions
Still have a question? Call us at (352) 851-8506.
Any blend from the XPS In Stock flake collection, the XPS sports-team colors, or a mix we create for you. If you already have a color in mind, describe it when you ask for a quote.
For a 20 x 20 ft garage (400 sq ft), about $1,600 to $4,800 at $4 to $12 per square foot. We price every job on its own, so your number depends on your slab.
We started in 2026, so we can't show you a five-year-old floor of our own yet. What we can show you is the warranty: 5 to 10 years, limited, depending on maintenance and care. It covers qualifying system failure and preparation failure. Misuse, impact, chemical damage and standing water are not covered, and coverage depends on following the care instructions.
A typical job takes 2 to 3 days.
Yes. Flake, chips and chip system are three names for the same floor.
Get a quote
Your garage, in flake
Tell us the garage size and the colors you like. We call you back as soon as we can.
Step 1 of 5
Goes straight to us. We never sell your details.
What happens next
- You answer five short questions.
- We call you back as soon as we can.
- We come out to look at the slab and price your floor.